No Products in the Cart
64G calss10 TF card, high speed and large storage.
Hidden design for most models of Audi cars, make it looks totally like a part of your car.
G Sensor emergency lock , locked video will be kept safe from being overwritten in case of an accident dispute, the evidence is really helpful in traffic dispute.
It integrates into the rearview mirror to give a factory look for various types of Audi car models
Only a few plug-and-play easy install steps, no hanging wires.External GPS Optional When playing back the video, the APP video below will show the longitude-latitude, speed, etc
2K Quad HD Resolution
Novatek dual-board assembly, EMC protective device with more sufficient space layout.
Default 64G class 10 TF card storage, max 256 TF card can support
Support GPS, driving trajectory replay through mobile app. The external GPS tracker needs to be purchased separately.
24 hours G-sensor collision detection parking monitoring function
Mobile APP WiFi interconnected
Working voltage 9~18V, short circuit, and low voltage protection function
143° wide-angle camera
Hot sale universal hidden dash camera, 1:1 restore the original rearview mirror housing design
|Image Sensor||IMX335 5M CMOS|
|Lens Material||2G4P+IR waterproof|
|Lens Angle||diagonal 143°|
|Video Format||H.264encoding， TF format storage|
|Effective Pixel||5 million pixel|
|Recording Mode||1min/3mins/5mins/loop recording|
|Storage||TF card（Class 10 or above, max support 512G)|
|GPS||Support,external GPS optional|
|Collision Detection||Triaxial accelerometer|
|Parking Monitoring||Start recording 20s after collision|
|Start-up Time||About 10 Seconds|
|Working Currency||250MA ±10MA|
|Front Cam Installation||Plug-and-Play or Hard-wiring Both Support|
|Application||Use for Audi A1 2015 s line style edition TFSI; Audi A4 S Line 2016; Audi A4 2018; Audi A6 C7.5 2016; Audi S3 2017, etc.|
1. Host x1
2. Rain sensor plug-and-play power cable x1
3. S015 fuse box power cable x 1
4. 64GB TF card x 1
5. Pry tool x1
6. Manual x 1
|Product Dimension||277 x 160x 92 mm|
There are 2 common ways to power Mercylion A3 series dash cams(for Audi). Rain sensor powering and Fuse box powering methods. Rain sensor plug-and play cable and fuse box hard-wiring cable are included in the package, you can choose one of them to install the dash cam according to your actual needs. If you have questions during installation, please feel free to contact us, we are here to help.
Get power from Rain Sensor
Use the pry tool to remove your vehicle's original rear view mirror housing carefully, connect the plug-and-play cable corresponding end to the rain sensor and the dash cam, then clean up the wires. Finally, tear off the lens protective film and install the recorder shell well.
Rain Sensor Connection Instruction
The picture takes A10 as an instance, the rain sensor plug place depends on your vehicle type, if you can't find it correctly, email us.
Rain Sensor Powering Installation Tutorial(Take MERCYLION A40-1CH Dash Cam as a Reference)
Get power from Fuse Box
If you choose to install by get power from fuse box, it is recommended to have a professional to install it. A1 series dash camera fuse box wire has two terminals, the connection method is as follows：
|Yellow wire||12V Constant Power||Connect to the positive electrode of the car battery (BATT+)|
|GND||Grounding; connect to the negative pole of the car battery and ground|
Fuse Box Wiring Instruction
|Special Notice: Do not install/mount the camera or cables near an airbag panel or within the airbag’s working range. The manufacturer is not liable for any injury or death caused by the deployment of the airbag.|
Fuse Box Powering Installation Tutorial(Take MERCYLION A40-1CH Dash Cam as a Reference)