No Products in the Cart
TEST 2k ultra HD recording, helps you read the key details like road signs, vehicle number plates.
Built-in Wi-Fi, allows you download videos to your smartphone and sharing on social media.
24 hours G-sensor collision detection parking monitoring function.
It integrates into the rearview mirror to give a factory look
Before Installation After Installation
External GPS Optional
2K ultra HD Resolution
Novatek dual-board assembly, EMC protective device with more sufficient space layout.
64G class 10 TF Card Storage
Support GPS, driving trajectory replay through mobile app. The external GPS tracker needs to be purchased separately.
24 hours G-sensor collision detection parking monitoring function
Mobile APP WiFi interconnected
Working voltage 9~18V, short circuit and low voltage protection function
Wide angle camera
Hot sale factory look dash camera for benz, 1:1 restore the original rearview mirror housing design
| Model No | A10-1CH |
| Channel | 1CH |
| Processor | NT96675 |
| Screen | / |
| Image Sensor | IMX335 5M CMOS |
| Lens Material | 2G4P+IR waterproof |
| Aperture | F1.4 |
| Lens Angle | diagonal 143° |
| Max Resolution | 2560*1600 |
| Encoding Type | H.264 |
| Video Format | H.264encoding， TF format storage |
| Effective Pixel | 5 million pixel |
| Picture Format | JPEG |
| Recording Mode | 1min/3mins/5mins/loop recording |
| Storage | TF card（Class 10 or above, max support 512G) |
| GPS | Support,external GPS optional |
| Wireless Connection | 802.11b/g/n/ac |
| Collision Detection | Triaxial accelerometer |
| Horn | 8Ω1W |
| Parking Monitoring | Start recording 20s after collision |
| Start-up Time | About 10 Seconds |
| Working Voltage | DC12V |
| Working Currency | 250MA ±10MA |
| Operating Temperature | -20℃-65℃ |
| Certifications | CE, FCC, RoHS, E-mark, ITAF16949, CCC, IP69K |
| Application |
Use for Mercedes-Benz C Class, E Class, GLC Class, C180, C200, E300, GLC200, GLC260, GLC300, C220 2015, etc. |
1. Host x1
2. Rain sensor plug-and-play power cable x1
3. S015 fuse box power cable x 1
4. 64GB TF card x 1
5. Pry tool x1
6. Manual x 1
| Package Dimension | 288 x233 x 70 mm |
| Package Weight | 1kg |
There are 2 common ways to power Mercylion A1 series dash cams(for Mercedes-Benz). Rain sensor powering and Fuse box powering methods. Rain sensor plug-and play cable and fuse box hard-wiring cable are both included in the package, you can choose one of them to install the dash cam according to your actual needs. If you have questions during installation, please feel free to contact us, we are here to help.
Installation Overview
Get power from Rain Sensor
Use the pry tool to remove your vehicle's original rear view mirror housing carefully, connect the plug-and-play cable corresponding end to the rain sensor and the dash cam, then clean up the wires. Finally, tear off the lens protective film and install the recorder shell well.
Rain Sensor Connection Instruction
The picture takes A10 as an instance, the rain sensor plug place depends on your vehicle type, if you can't find it correctly, email us.
Rain Sensor Powering Installation Tutorial(Take MERCYLION A40-1CH Dash Cam as a Reference)
Get power from Fuse Box
If you choose to install by get power from fuse box, it is recommended to have a professional to install it. A1 series dash camera fuse box wire has two terminals, the connection method is as follows：
| Wiring | Definition | Function |
|---|---|---|
| Yellow wire | 12V Constant Power | Connect to the positive electrode of the car battery (BATT+) |
|
Black wire |
GND | Grounding; connect to the negative pole of the car battery and ground |
Fuse Box Wiring Instruction
 |
Special Notice: Do not install/mount the camera or cables near an airbag panel or within the airbag’s working range. The manufacturer is not liable for any injury or death caused by the deployment of the airbag. |
Fuse Box Powering Installation Tutorial(Take MERCYLION A40-2CH Dash Cam as a Reference)
